Many of us here in the Heartland will be celebrating Christmas and for for many people, decorating the Christmas tree is a favorite
part of the holiday. Almost all of us have photos growing up of mom or dad putting the angel/star on top (or trying to hold one of us kids to do it for them). The National Safety Council offers some safety tips to
make sure a Christmas tree mishap doesn't spoil your holiday season.
Christmas Trees
·
Natural and artificial Christmas trees start an
average of 250 home structure fires each year, according to the National Fire
Protection Association. These fires cause approximately 14 deaths, 26 injuries
and $13.8 million in property damage yearly.
 |
| Look for the UL Label |
·
Try to select a fresh tree by looking for one
that is green. The needles of pines and spruces should bend and not break and
should be hard to pull off the branches. On fir species, a needle pulled from a
fresh tree will snap when bent, much like a fresh carrot. Also, look for a
trunk sticky with sap.
·
Cut off about two inches of the trunk and put
the tree in a sturdy, water-holding stand. Keep the stand filled with water so
the tree does not dry out quickly.
·
Stand your tree away from fireplaces, radiators
and other heat sources. Make sure the tree does not block foot traffic or
doorways.
·
If you use an artificial tree, choose one that
is tested and labeled as fire resistant. Artificial trees with built-in
electrical systems should have the Underwriters Laboratory (UL) label.
Tree lights
·
Only use indoor lights indoors (and outdoor
lights only outdoors). Look for the UL label. Check lights for broken or
cracked sockets, frayed or bare wires, or loose connections. Replace or repair
any damaged light sets.
·
Also, use no more than three light sets on any
one extension cord. Extension cords should be placed against the wall to avoid
tripping hazards, but do not run cords under rugs.
·
Turn off all lights on trees and decorations
when you go to bed or leave the house.
No comments:
Post a Comment